C1206F SMD FUSE
Brand : Songshan
Product origin : Shanghai
Delivery time : 7-15 days
Supply capacity : 15000000
SMD C1206F series are used for secondary protection of circuits, and is applicable to applications with limited space. It is mainly used in battery packs, PCs and PC peripherals, game devices, module power supplies, LCD displays and modules, UAVs, and BMS of new energy vehicles.
1. Electrical Characteristics
Ampere Rating | % of Current Rating | Opening Time |
0.5-30A | 100% | Min.4hours |
250% | Max60sec |
2. Electrical Specifications
Part Number | Current Rating(A) | Voltage Rating(V) | Interrupting Capacity | Typical Cold DCR(mΩ) | Nominal I²T* (A²s) | Marking |
C1206-F-0.50A | 0.5 | 125VDC | 50A@125VDC | 0.107 | 0.05 | A |
C1206-F-0.63A | 0.63 | 0.092 | 0.08 | B | ||
C1206-F-0.75A | 0.75 | 0.079 | 0.15 | C | ||
C1206-F-1.00A | 1 | 0.068 | 0.21 | D | ||
C1206-F-1.25A | 1.25 | 0.057 | 0.28 | E | ||
C1206-F-1.50A | 1.5 | 0.043 | 0.41 | F | ||
C1206-F-1.60A | 1.6 | 0.040 | 0.63 | U | ||
C1206-F-2.00A | 2 | 0.026 | 1.07 | H | ||
C1206-F-2.50A | 2.5 | 0.021 | 1.72 | I | ||
C1206-F-3.00A | 3 | 0.018 | 2.52 | J | ||
C1206-F-3.15A | 3.15 | 65VDC | 50A@65VDC | 0.0172 | 2.75 | K |
C1206-F-3.50A | 3.5 | 0.0153 | 3.1 | V | ||
C1206-F-4.00A | 4 | 0.0140 | 3.3 | L | ||
C1206-F-5.00A | 5 | 0.0107 | 5.7 | M | ||
C1206-F-6.30A | 6.3 | 0.0083 | 9.0 | N | ||
C1206-F-7.00A | 7 | 48VDC | 200A@48VDC | 0.0052 | 12.8 | O |
C1206-F-8.00A | 8 | 0.0063 | 17 | P | ||
C1206-F-10.0A | 10 | 0.0052 | 11.4 | Q | ||
C1206-F-12.0A | 12 | 0.0040 | 15 | R | ||
C1206-F-15.0A | 15 | 0.0030 | 26 | S | ||
C1206-F-20.0A | 20 | 0.0024 | 28 | T | ||
C1206-F-25.0A | 25 | 36VDC | 200A@36VDC | 0.0018 | 46 | X |
C1206-F-30.0A | 30 | 0.0015 | 72 | Y |
3. Dimensions
Type | L | W | T | D |
(mm) | (mm) | (mm) | (mm) | |
C1206 | 3.2±0.20 | 1.6±0.25 | 1.1±0.2 | 0.85±0.35 |
4. Recommended Land Patterns
Dimensions | Spec |
A（mm） | 1.5 |
B（mm） | 4.4 |
C（mm) | 2.4 |
D（mm） | 1.45 |
5. Materials
Components | Material |
Body | Epoxy flame retardant materials |
Fuse-element | Copper alloy |
Terminations | Tin Plated Copper |
6. Part Number Information
7. Time Current Curve
8. Temperature Re-rating Curve
When choosing the fuse's specification,if the operating Environmental temperature beyond the scope from 20~30℃，engineer should consider the environmental temperature's Affection to fuses.Please refer Temperature Re-rating Curve.
9. Product Characteristics
Item | Test condition | Performance | Standard |
Time/Current | 100% of current rating | 4hr Min | UL248-14 |
250% of current rating | 60sec Max | Factory SPEC | |
1000%of current rating | 10msec Max | Factory SPEC | |
Interrupting Ability | 125VDC50A 65VDC50A 48VDC200A 36VDC200A
| without permanent arcing,ignition and bursting of fuse link | UL248-14 |
Solder ability | 240℃±5℃，3sec±0.5sec, | 90% coverage Min. | MIL-STD-202 |
Resistance to Soldering Heat | 260℃±5℃，10sec±0.5sec, | |△R|: <10% | MIL-STD-202 |
Moisture resistance | 10 cycle | |△R|: <10%., no mechanical damage | MIL-STD-202 |
Salt Spray | 5%±1% salt solution ，48hours | |△R|: <10% | MIL-STD-202 |
Mechanical Shock |
| |△R|: <10%., no mechanical damage | MIL-STD-202 |
Mechanical Vibration | Amplitude 10Hz～55Hz in 1 min. 2 hours，each XYZ, total 6 hours | |△R|: <10%., no mechanical damage | MIL-STD-202 |
Thermal Shock | -65°C to +125°C, 100 cycles, | |△R|: <10%., no mechanical damage | MIL-STD-202 |
10. Storage
Packaged Fuse should be storage at ambient temperature for -10~+40 ℃ relative humidity below 80%,the warehouse of Ambient air in non-acidic, non-alkaline or other no corrosive gases,Before use, need to confirm the aluminum foil bag sealing intact.
11. Recommended Solder Curve
12.Packaging
Tape（mm） | Reel（inch） | Quantity |
8 | 7 | 3500 |
13. Others
This product is fully in line with the EU ROHS requirements!